"Hold It" V2 Print Cover Holder by YelTrik Designs - Click FOLLOW

YelTrik Designs - Click FOLLOW

3D Printer>3D Printer Parts

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

PLA Matte 0.16mm layer, 2 walls, 15% infill

Designer

48 min

1 plate

4.9(18)

PLA 0.16mm layer, 2 walls, 15% infill

Designer

48 min

1 plate

4.8(16)

Boost

165

232

140

Released

Description

UPDATED AND IMPROVED VERSION!

This is an updated and improved version of the P1 and X1 bracket that holds the Front Print Head Cover up and out of the way when replacing print heads. Think of it as an improved third hand!

New Improvements

Added a back-stop that helps keep the Print Head Cover secure
Lengthened the front-stop to better contain the Print Head Cover
Wider to increase stability
Reduced filament requirement by adding some stylish hex-shape openings.

Design Principles

The PRIMARY design principles for this model is ‘do no harm’ to the carbon fiber rods. I could have easily made this to snap on the carbon fiber rods. However, doing so risks damaging the rods (read: expensive and difficult fix). To avoid any damage, I designed straight faces where this contacts the rods. They provide the least amount of contact with the rod while still providing the required support.

Comment & Rating (72)

@tollgedruckt

Print Profile

PLA Matte 0.16mm layer, 2 walls, 15% infill

Must have!

The designer has replied

@YelTrikDesigns

Thank you for the feedback and 5 star rating! Make sure to check out my other models and Bambu Printer Accessories. More to come so LIKE and FOLLOW to get updates. Thanks again!

@chromos

Print Profile

PLA Matte 0.16mm layer, 2 walls, 15% infill

Thanks for the model, it has served me well.

The designer has replied

@YelTrikDesigns

Thank you for the feedback and 5 star rating! Make sure to check out my other models and Bambu Printer Accessories. More to come so LIKE and FOLLOW to get updates. Thanks again!

@VSC42

Print Profile

PLA 0.16mm layer, 2 walls, 15% infill

Great way to get the X1C's print head cover out of the way without stressing the cable.

The designer has replied

@YelTrikDesigns

Thank you for the 5 star rating! Make sure you check out my other Bambu Printer Accessories. More on the way, so LIKE and FOLLOW for updates.

@OzDruiD

Print Profile

PLA 0.16mm layer, 2 walls, 15% infill

Prints well, X1C, Sunlu green PLA, I like bright coloured tools so I remember to remove them haha. Recommended brim peeled away without issue easily. Well done.

The designer has replied

@YelTrikDesigns

Comment of the day! Thank you for the feedback and 5 star rating! Make sure to check out my other Bambu Printer Accessories. More to come so LIKE and FOLLOW to get updates. Thanks again!

@DMTaino

Print Profile

PLA 0.16mm layer, 2 walls, 15% infill

Easy print no issues at all, Printed in IIID Max PLA+ Silver.

(Edited)

The designer has replied

@YelTrikDesigns

Thank you for the feedback and 5 star rating! Looking good in Silver! Make sure to check out my other Bambu Printer Accessories. More to come so follow to get updates. Thanks again!

(Edited)

@GregR

Print Profile

PLA Matte 0.16mm layer, 2 walls, 15% infill

perfect tool

The designer has replied

@YelTrikDesigns

Thank you for the feedback and 5 star rating! Make sure to check out my other models and Bambu Printer Accessories. More to come so LIKE and FOLLOW to get updates. Thanks again!

@Lipoma

Print Profile

PLA Matte 0.16mm layer, 2 walls, 15% infill

Very useful, Thanks!

The designer has replied

@YelTrikDesigns

Thank you for the 5 star rating! Make sure you check out my other models and Bambu Printer Accessories. More on the way, so LIKE and FOLLOW for updates.

@mardarelaurenti

Print Profile

PLA 0.16mm layer, 2 walls, 15% infill

Perfect fit. Thank you!

The designer has replied

@YelTrikDesigns

Thank you for the feedback and 5 star rating! Make sure to check out my other models and Bambu Printer Accessories. More to come so LIKE and FOLLOW to get updates. Thanks again!

@pjleyland

Print Profile

PLA Matte 0.16mm layer, 2 walls, 15% infill

Printed well - thanks

The designer has replied

@YelTrikDesigns

Thank you for the feedback and 5 star rating! Make sure to check out my other Bambu Printer Accessories. More to come so LIKE and FOLLOW to get updates. Thanks again!

@Nathan1803

Print Profile

PLA 0.16mm layer, 2 walls, 15% infill

Prints great! I haven't used it yet, but the print quality and build is solid.

The designer has replied

@YelTrikDesigns

Thank you for the feedback and 5 star rating! Make sure to check out my other Bambu Printer Accessories. More to come so LIKE and FOLLOW to get updates. Thanks again!

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.