Custom drawer spice rack to suit most jar brands in Australia, round and square.
Designed around Blum branded drawer rollers, with an internal clearance of 82mm and jars up to 109mm tall.
I have allowed 41mm width for each jar, there is also a shallow indent in the face so round jars stay centered and don't roll away.
I have included files for open ended and single end closed (left and right), to hold 1, 2, 4, 5 and 6 jars. You can easily glue 2 or more together.
Message me if you want more variations or to have files for both ends closed, these would likely require supports to print.
There are files name ‘flat’ and ‘flange’, this refers to the open face which you join together, the flange files make for easy locating and joining.
The ‘Joiner’ file is optional but would help if you want to fix the rows together without gluing. I have made the file 10mm long, scale to suit.
Created with OnShape, here's the link if you want to make a remix.
Printing vertically (with flat end face down) requires no supports, I haven't tried printing horizontally yet.
Printed perfectly with Bambu brown PLA. 0.2mm standard layer, 2 walls, Archane walls, Gyroid infill.
Edited to add the 4 jar variant.