Bambu Labs X1C - P1P - P1S Nozzle Wiper Upgrade to A1 Mini Brush Wiper by TotalChaos

TotalChaos

3D Printer>3D Printer Parts

GIF

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

PETG 0.08mm layer, 2 walls, 100% infill

Designer

33 min

1 plate

4.8(22)

eSun ABS+ HS

19 min

1 plate

Boost

213

218

100

Released

Description

Bambu Labs A1 Mini Brush Wiper Upgrade
designed for use in the X1C - P1P - P1S

SMALL UPDATE MADE 17/12/23

If you prefer the A1 Mini brush wiper to the stock wiper in your X1C, P1P or P1S
then this is the design for you!

This is a direct replacement for your stock wiper, no printer modifications required.

It's as easy as cutting the A1 Mini Brush wiper in half and sticking it inside the dedicated slot and installing the wiper as usual.

The hardest part is cleanly removing the supports which takes a couple min.

purchase the stock wipers below:
UK: https://uk.store.bambulab.com/collections/accessories-for-a1-mini/products/heatbed-nozzle-wiper-a1-mini?skr=yes

Best printed in PETG, ABS, 95A TPU

Comment & Rating (29)

@ZakoJaz

Print Profile

PETG 0.08mm layer, 2 walls, 100% infill

hopefully its good

The designer has replied

@TotalChaos

Works well. Use a bit of superglue to make sure wiper doesn't come off.

@DreamMaker

Replying to @TotalChaos :

what filament and plate are you using that you have to super glue

@TotalChaos

Replying to @DreamMaker :

superglue the Wiperblade into the holder instead of relying on the doublesided tape that comes on the wiper.

@HoLiTio

Print Profile

PETG 0.08mm layer, 2 walls, 100% infill

Work well.

@carlbrinsden

Print Profile

PETG 0.08mm layer, 2 walls, 100% infill

Nice and easy

@brx_one

Boosted

Print Profile

PETG 0.08mm layer, 2 walls, 100% infill

@SVCprints

any chance on getting one for the regular A1 brush? it’s like .5mm shorter than the mini brush so the mount needs to be raised a bit. but I prefer these brushes since they are sold not mounted to anything and are sold in 3 packs instead of 2. more bang for your buck! lol thanks!

@danny6869

How well does this work??

The designer has replied

@TotalChaos

I find it better than the original. Just add a drop of super glue when sticking the A1 wiper in.

@danny6869

Replying to @TotalChaos :

Amazing! I can't wait to try it out

@Kieran.TJH

Print Profile

PETG 0.08mm layer, 2 walls, 100% infill

It finally fixed most of the issues, with the nozzle not not been clean and poop keep on poping out of the printer

@malignity

Print Profile

PETG 0.08mm layer, 2 walls, 100% infill

Helps a lot from getting poops on the plate. Thanks!

@KilgorinLabs

Print Profile

PETG 0.08mm layer, 2 walls, 100% infill

World's OK, only seems to clean one side of the nozzle well. But better than the original

@3DArtFusion

Print Profile

PETG 0.08mm layer, 2 walls, 100% infill

Prints well enough, just be cautious when removing supports as the model is small and PETG likes to make supports that are not exactly easy to remove.

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

294

Print Profile(2)

Description

Comment & Rating (29)

License

Related Models

Poop Shoot Cover | P1 / X1 Series

JP ModOr buildplate module 80 for bambu plates

Queen Crown

Bambu G Duct