Summary

A friend asked me to print some holders/feet for his DnD screen, looking here I found a few designs but they only had one position... either straight or one angle, so I decided to make one with multiple positions. Then once that was printed I figured... why not make a box for them!

Screen Holder:

• 50mm dia x 13mm height
• The slots are done at 30degree increments and are a little over 2mm wide.
• To prevent them from sliding too easily, I've cut and glued pieces from an anti-slip drawer liner that I already had. I included the cutting template in the files.

Storage Box:

• 65mm dia x 100 height.
• The cover slides and clips directly in the main body of the box.
• The little pins on the main body are only for alignment purposes, you'll need to glue the cap & main body together (after having inserted the sliding cover... obviously lol)

I hope you'll like this simple design!

Storage box