PS5 Headphone and control stand by Rober7Crow

Rober7Crow

Hobby & DIY>Electronics

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 3 walls, 15% infill

Designer

12.7 h

1 plate

4.1(19)

0.2mm layer, 3 walls, 15% infill

Designer

13.8 h

1 plate

3.0(1)

0.2mm layer, 3 walls, 15% infill

8.8 h

3 plates

4.8(4)

Boost

374

547

716

166

Released

Description

I got the idea when I was making a headphone stand and a game board. I wanted to make a kind of whole, so that I could put everything together after playing. I played around with the designs a bit and came up with a stylish headphone and gamepad holder.
The PS 5 dualsense gamepad fits perfectly.
I printed with a Bambulab X1C + AMS for the multi-colour combination. Since my son liked it, I made him a V2 version in a different colour combination.
I hope you like the product and find it useful.

Update: Corrected top Z distance to 0.2 because it is too hard to remove support

REMOVE THE SUPPORT GENTLY, USING PLIERS.

3D PRINTING SETTINGS
layer height 0.2 mm
wall loops 3
15% Gyroid fill
Hybrid support tree on the build plate only

My new addition to the collection is a game stand

Rober7Crow | Published - MakerWorld

Comment & Rating (52)

@dlrjlh1128

Print Profile

0.2mm layer, 3 walls, 15% infill

I love it looks great and easy to print

The designer has replied

@Rober7Crow

Thank you very much, now enjoy playing PS5.

@cwilliams1150

Print Profile

0.2mm layer, 3 walls, 15% infill

incredible design! I ran out of silver filament so I switched to grey.

The designer has replied

@Rober7Crow

Looks good, thanks for the 5 stars

(Edited)

@Epsylon3d

hi, i ve tried to print your model but it is impossible to do it correctly, i show yon with photos cause my ernglish is not very good for explain correctly. the head hurts non fused filaments and fail the print have you make "fusion" option when you have build your modeling work? it seem the differnts parts haven't fused together befor export in 3mf or something like that. otherwise yous desing is pretty cool very

The designer has replied

@Rober7Crow

The model is made as a whole, combined in the MagaCad software. Then converted to Bambu studio and there processed with colours. When you colour in Bambu Studio, the colour is automatically layered into another filament. I printed 5 pieces myself, different colours. I also used the Fuzzy skin. With the first one I had a problem with the tree support because it broke, that's why it's so reinforced. But you also have an STL model and try to download it and you'll see it's all one piece.

(Edited)

@VJPPEREZ

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

quedó perfecto

@elhachemaker

Print Profile

0.2mm layer, 3 walls, 15% infill

Support Issue

Strength Issue

The designer has replied

@Rober7Crow

a little patience is needed, design needs a lot of support.

@elhachemaker

Replying to @Rober7Crow :

Más de una hora quitando los soportes y no fue posible sin dañarlo

@Wingnut1090

Print Profile

0.2mm layer, 3 walls, 15% infill

Great print. Keeps controllers off the floor.

@dexte_lab

Print Profile

0.2mm layer, 3 walls, 15% infill

Beatiful model, thank you!!

(Edited)

@user_1782069048

will this work with the dual sense edge? anyone tried it?

The designer has replied

@Rober7Crow

is not perfect, please see attached photo

@user_1782069048

Replying to @Rober7Crow :

thank you for checking and taking photos. close!

@Rober7Crow

Replying to @user_1782069048 :

no problem 🤷

@JesustoMasdao

hi friend, sorry, can you have individual model with holes? i like print parts separately and fit them, i think is better to save filament. Thanks and great design

The designer has replied

@Rober7Crow

I can make you a model with holes so you won't need so much support.

@Rober7Crow

please find attached link :) https://makerworld.com/en/models/158052#profileId-173478

@JesustoMasdao

Replying to @Rober7Crow :

ohhh, ok, thanksss!! PRINT TODAYYY