A1 & A1 mini Hotend Face Plate Cover P51 Mustang by Maoirae

Maoirae

3D Printer>3D Printer Accessories

GIF

Print Profile(7)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

Frame 0.16mm layer, 2 walls, 15% infill

Designer

28 min

1 plate

5.0(10)

Faceplate 0.08mm layer, 2 walls, 15% infill

Designer

3.6 h

1 plate

4.9(10)

Propeller 0.08mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.6(10)

A1mini Faceplate - 0.08mm layer, 2 walls, 15% infill

Designer

3.8 h

1 plate

5.0(1)

Click to see more

Boost

101

115

Released

Description

This is front cover for print head for A1 and A1mini, that I created to make printer a little different. Its made in famous P51 Mustang plane design.

Frame is the same for all my designs so you print just one and change faceplates as you like. ¨

To install press extruder pin into nosecone and then propeller blades. you can use a bit of superglue.

Than just press faceplate into frame at all four corners.

And now remove original faceplate and extruder visualizer from your printer and just clip frame to print head instead of original faceplate and than instal propeller.

More designs is coming ;)

Comment & Rating (46)

@skop.roman

Print Profile

Faceplate 0.08mm layer, 2 walls, 15% infill

Nice.

The designer has replied

@Maoirae

Jsrm rád že se líbí 🙂

(Edited)

@skop.roman

Replying to @Maoirae :

Nápad i provedení se mi líbí, ale už budu tisknout třetí osu vrtule... první se mi ulomila při sundávání z podložky, s druhou mi vrtule při vibracích padala, tak jsem dal kapku lepidla. Co čert nechtěl, zasekl se filament a tak jsem musel sundat kryt a přitom se ulomila opět půlka osy. Zkusím si nakreslit bez toho rozpůlení a trošku delší. Tam je kritické místo, kde se buď hodně otevře a padá, nebo se rovnou ulomí :-/

(Edited)

@Maoirae

Replying to @skop.roman :

Pokud se to láme tak bych viděl problém ve filamentu, bude zkřehlý. At se snažím sebevíc tak to nezlomím, jedině v kleštích. Co se týká vypadnutí koukal jsem na to a dal jsem tam omylem opačný skos. uz jsem nahrál opravený pin.

@bdsaintess

Boosted

Print Profile

A1mini propeller - 0.08mm layer, 2 walls, 15% infill

This really ties everything in together. Print very well, and fit right where it was supposed to. The spinner action is really awesome to watch, especially for little WWII fans.

The designer has replied

@Maoirae

Im glad you both like it 🙂

@AndyF_CH

Print Profile

Faceplate 0.08mm layer, 2 walls, 15% infill

everything fine, print is Top! Thank you very much

The designer has replied

@Maoirae

Im glad you like it 🙂

@Dadgineered

Print Profile

Faceplate 0.08mm layer, 2 walls, 15% infill

printed quickly and accurately. favorite extruder mod!

The designer has replied

@Maoirae

Im glad you like it 🙂

@bdsaintess

Boosted

Print Profile

A1mini Frame - 0.16mm layer, 2 walls, 15% infill

Frame print really well, attaches perfectly, and the faceplate clicks right into it.

@bdsaintess

Boosted

Print Profile

A1mini Faceplate - 0.08mm layer, 2 walls, 15% infill

Print really well, no issues. very cool make, thanks for sharing! my 11yo lives WWII and this is a perfect addition.

@yobtnirp

Print Profile

Propeller 0.08mm layer, 2 walls, 15% infill

works perfect and looks great!

@user_782444549

prints perfect

The designer has replied

@Maoirae

Thanks

@user_1577651699

Print Profile

A1mini propeller - 0.08mm layer, 2 walls, 15% infill

good but the fan does not stay on

The designer has replied

@Maoirae

It should stay on. Did you calibrate your filament profile?

@user_1577651699

Replying to @Maoirae :

yes

@skop.roman

Print Profile

Propeller 0.08mm layer, 2 walls, 15% infill

paráda, díky

The designer has replied

@Maoirae

není zač, hlavně jak se líbí 🙂

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.