If you are like me and think the Clicky Rotate Counter by BaGoon is great, you may have printed more than one, if so, this tray and case are just for you.

You can choose between a tray to hold them on a desk or a case that makes them portable.

I have provided trays and cases (with options) for 2 to 6 counters. If you need to store more, leave a message and I will see what I can do.

If you require a case, simply select the Tray profile and the number of slots and print.

If you prefer a case, choose any profile that begins with Case and print one for the base and one for the lid. You may also choose to print a different lid that has the branding “Clicky Counters” or the Bambu Lab logo. The branded lids are two colours and require an AMS.

• Tray - print a tray of your choice
• Case - print two bases (one for the bottom and one for the lid.
• Branded Case - print a base and either the Clicky Counters or Bambu Lab branded tops.

The Base and different Tops are mirrors of each other, you will require eight magnets total, four for each half. You will need 3x2mm magnets, the ones I purchased are from Amazon and are called Wukong 200Pcs 3x2mm Strong Refrigerator Magnets. Any 3x2mm magnets should work fine.

To make inserting the magnets easier, I use the excellent Embedded Magnet Dispenser by Brian Dean, with this tool you can quickly and easily insert magnets (both north and south poled) into your prints and designs.

I hope you enjoy these and make great use of them.