Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 67.73x90mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.2
PLA BambuLab Basic Jade White Transmission Distance: 5.9
PLA PolyLite Cream Transmission Distance: 2.9
PLA Polylite Cold White Transmission Distance: 0.8

This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Jade White
At layer #13 (1.12mm) swap to Cream
At layer #17 (1.44mm) swap to Jade White
At layer #20 (1.68mm) swap to Cold White
At layer #21 (1.76mm) swap to Black
At layer #22 (1.84mm) swap to Jade White for the rest.