Hueforge print of Cena's feat of strenght with Big Show and Edge from WWE with frame so you can use it like a table photo frame or even hang on the wall !

REMEMBER TO DOWNLOAD AL THE 3MF → CLICK ON DOWNLOAD STL !

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Sapphire Blue Transmission Distance: 0.3
PLA PolyTerra Pastel Ice Transmission Distance: 1.5
PLA Sunlu Meta White Transmission Distance: 8

Swap Instructions:
Start with Charcoal Black
At layer #10 (0.88mm) swap to Sapphire Blue
At layer #16 (1.36mm) swap to Pastel Ice
At layer #22 (1.84mm) swap to White for the rest.

Glue the frame in the back and connect the supports with two 3x30 dowel pins:

https://www.amazon.com/Unifizz-Stainless-Support-Shelves-Silver/dp/B0CZLGY3B3/ref=sr_1_19?sr=8-19

If you want to hang it on the wall glue in the frame two sawtooth picture hangers like these:

https://www.amazon.com/Sawtooth-Picture-Hangers-Solutions-Paintings/dp/B07L2NSJ2B/ref=sr_1_3?sr=8-3