Swan in night lake - HueForge
Print Profile(2)
Description
Swan in night lake
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.4mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Overture Matte Blu Navy Transmission Distance: 1.6
PLA Sunlu Meta Green Transmission Distance: 10
PLA Sunlu Meta Blue Transmission Distance: 5.7
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Blu Navy
At layer #8 (0.72mm) swap to Green
At layer #14 (1.2mm) swap to Blue
At layer #20 (1.68mm) swap to White for the rest.
Thank you!!
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
